Intern in the Electrical Department, Energy Storage Section

Internship Opportunity in the Electrical Department, Energy Storage Section

Our team and mission

The Power Systems, EMC and Space Environments Division is responsible for all aspects of power systems required for ESA spacecraft and payloads. More specifically, TEC-EP responsibilities encompass:

• Power sources such as solar generators and nuclear devices
• Electrical energy storage devices such as batteries, super capacitors and fuel cells
• Electrical Power management and conditioning systems
• Nuclear power system engineering
• Power distribution and protection techniques and technologies
• Electrical harness design and engineering
• EMC modelling, engineering and related testing
• Analysis and modelling of space environments and their effects on space systems
• Design of space environments and effects monitoring hardware
• Supporting standardisation activities for all the above listed technologies

The Division’s activities also encompass system trade-offs and detailed assessment of the related technologies, as well as bread-boarding and testing in the associated laboratories and facilities: the Electromagnetic Laboratory and its facilities, the ESA Space Power Laboratory and its facilities in Solar Generation, Power, and Energy Storage (Battery and Fuel Cells).

Electric energy storage is crucial for all space applications. Batteries are used in launchers as well as in Low-Earth Orbit (LEO), Geostationary Earth Orbit (GEO) and science spacecraft when energy from sunlight is unavailable. The most important characteristic of a space battery is specific energy, measured in Wh/kg. Since most lithium-ion battery developments are currently happening for terrestrial applications, spin-in into the space sector is of utmost importance. Current developments aim to further improve the specific energy of new lithium-ion space batteries.

The Energy Storage Section covers all aspects of energy storage for space applications, typically primary and secondary batteries, fuel cells and supercapacitors. The Section is at the forefront of these developments, leading R&D activities, supporting space missions, and performing independent testing of novel battery technologies in our own battery test facility. To assess the sizing and performance of batteries for different missions, an independent battery model has been developed and validated. This model will be utilized to simulate different cases, which can occur on the battery during different mission phases.

Internship Opportunity: Space Li-Ion Cell and Battery Modelling and Simulations

Topic of the internship: Space Li-Ion Cell and Battery Modelling and Simulations

The aim of this opportunity is to perform battery simulations using our independent battery model in close cooperation with the energy storage engineers and the power management engineers in the team. Different mission scenarios including the launch phase, failure cases, abusive conditions as well as end of life performance shall be simulated. A further task will be to advance the battery models of the Energy Storage Section. Existing models shall be refined and optimised and new models for new cell types or battery configurations may have to be developed. These model developments will be supported by experimental testing at our own test facility. You will draw up test plans and work closely with all the Section members and the test facility team to implement the tests. The data will be assessed and the models built based on the experimental results.

During your internship, you will work on the following core activities:

• Simulation of Li-ion space batteries performance during different space mission scenarios
• Modelling of Li-ion batteries for space applications
• Refinement of cell and battery models and related documentation
• Definition and testing of battery cells and batteries
• Evaluation of test results and extraction of test parameters
• Writing a comprehensive report and presenting the work at the end of the project

The scope of work could be expanded to cover the following:

• Developing new Li-Ion cell model
• Li-ion battery abuse testing in space-relevant conditions

Behavioural competencies

• Result Orientation
• Operational Efficiency
• Fostering Cooperation
• Relationship Management
• Continuous Improvement
• Forward Thinking

Education

You must be a university student, preferably studying at master’s level. In addition, you must be able to prove that you will be enrolled at your University for the entire duration of the internship.

Additional requirements

The working languages of the Agency are English and French. A good knowledge of one of these is required. Knowledge of another ESA Member State language is an asset.

During the interview, your motivation for applying to this role will be explored.

You shall have a demonstrated knowledge of Li-Ion cell and battery technology modelling and simulation along with relevant hands-on experience in testing, data processing and analysis.

Knowledge and background in space batteries is an asset.

Important Information and Disclaimer

During the recruitment process, the Agency may request applicants to undergo selection tests.

Applicants must be eligible to access information, technology, and hardware which is subject to European or US export control and sanctions regulations.

The information published on ESA’s careers website regarding internship conditions is correct at the time of publication. It is not intended to be exhaustive and may not address all questions you would have.

Nationality

Please note that applications are only considered from nationals of one of the following States: Austria, Belgium, Czechia, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, and the United Kingdom.