Intern in the Mechanical Systems Department, In Situ Resource Utilisation

Explore an Internship in the Mechanical Systems Department: In Situ Resource Utilisation

Our team and mission

Join the Optics, Robotics and Life Sciences Division at ESTEC. The Optics, Robotics and Life Sciences Division is responsible for the technical and strategic management in the following space segment domains at subsystem and instrument level:

• Optical systems: Design, engineering and verification in all optical related areas, including optical component technology, micro-optics, fibre and passive integrated optics; spectro-radiometric imaging instruments in the x-ray, ultraviolet, visible and infrared region; optical metrology, and space micro-nano technology systems, stray-light analysis and verification. Calibration and verification of optical payloads, covering the definition, procurement and commissioning of Optical Ground Support Equipment (OGSE). In orbit commissioning of optical payloads. Measurement of optical properties of key optical components by devising ad-hoc measurements in the Optical and Optoelectronics Laboratory (OOEL).
• Optoelectronics: Laser systems and sensors, LIDAR and laser ranging systems, including optical metrology and time and frequency distribution, photo-detectors and focal plane technologies for the x-ray, ultraviolet, visible and infrared range; photonics technologies and application, including integrated and fibre optics, RF photonics, micro-nano-photonics, opto-pyrotechnics, fibre sensors, non-linear optics, superconductor technology and optical atomic clocks; optical communication technologies and systems, optical communication links and optical payloads; optoelectronics/photonics for spacecraft applications; quantum technologies including quantum devices, metrology, sensing, quantum key distribution and cold atom interferometry.
• Optical chain architecture: Design, analysis, and technical assessment of optical instruments, subsystems, detection chains systems and focal plane instrumentation, optical communication systems for classical and quantum communications, time and frequency transfer, intersatellite ranging and similar end-to-end systems.
• Automation and robotics: Space automation and robotic systems, including planetary (surface, sub-surface and aerial) robotics probes, space robot payloads and their control systems, space laboratory automation, human-robot-interaction, tele-robotics in manned and unmanned missions, as well as automation and robotics technology for ground MAIT.
• Life & physical sciences instrumentation: Technologies needed for planetary exploration missions and for life and physical sciences experiments in space, as well as technologies needed for life support, crew health and habitability of manned missions, and In-Situ Resources Utilisation.

Field(s) of activity for the internship

Topic of the internship: In Situ Resource Utilisation

Currently, experiments on oxygen production using molten salt electrolysis are being performed in the ESTEC laboratories. These experiments will reduce the samples to extract the oxygen and turn the samples into metallic powders, potentially suitable for additive manufacturing. Although these electrochemical experiments can use powder material, a sintered block is preferred. The whole process poses many challenges in terms of material and electrolyte stability, process efficiency and yield, sintering process parameters and optimisation.

In this internship, you are expected to:

• Learn about the lunar materials and environment
• Learn about the lunar soil simulants and variations to actual lunar soil
• Learn about existing processes in the field of In-Situ Resource Utilisation (ISRU)
• Develop a comprehensive procedure to sinter lunar soil and lunar soil simulant
• Characterise lunar soil simulant before and after sintering by SEM/EDX, XRD, XRF, X-Ray Tomography
• Support the electrochemical experiments extracting the oxygen from the sintered lunar soil simulants

You will also be immersed in the ESA environment which includes space mission preparation and experimentation.

Behavioural competencies

• Result Orientation
• Operational Efficiency
• Fostering Cooperation
• Relationship Management
• Continuous Improvement
• Forward Thinking

Education

You must be a university student, preferably studying at master’s level. In addition, you must be able to prove that you will be enrolled at your University for the entire duration of the internship.

Additional requirements

• The working languages of the Agency are English and French. A good knowledge of one of these is required. Knowledge of another ESA Member State language is an asset.
• During the interview, your motivation for applying to this role will be explored.
• Knowledge and background in Materials Science, Chemistry, Chemical Engineering, Aerospace Engineering is an asset.

Important Information and Disclaimer

• During the recruitment process, the Agency may request applicants to undergo selection tests.
• Applicants must be eligible to access information, technology, and hardware which is subject to European or US export control and sanctions regulations.
• The information published on ESA’s careers website regarding internship conditions is correct at the time of publication. It is not intended to be exhaustive and may not address all questions you would have.

Nationality

Please note that applications are only considered from nationals of one of the following States: Austria, Belgium, Czechia, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, and the United Kingdom.